Slope step steel raw, series Mini, 200 mm, smooth with anti-slip foil

Slope step "MINI", raw steel, 200 mm deep, smooth with anti-slip foil, with or without recessed grip

€85.25

(€85.25 per piece)

VAT included Shipping excluded


Slope steps type "Mini" are suitable for slope inclination up to 45 degrees! If the slope is bigger, you can work with the extension bars if necessary.


Please choose the size of the tread and whether the step should have a recessed grip or not.

Tread (D x W)
  • 200 x 200 mm
  • 200 x 290 mm
  • 200 x 380 mm
Recessed grip
  • Yes
  • No
Weight
  • 1,6 kg
Length bar
  • 420 mm (for step width 200 mm)
Article number
  • SR020
Quantity
Out-of-Stock

The minimum purchase order quantity for the product is 100.
You can find products without minimum purchase quantity by clicking here!

Slope step steel raw, series "MINI" 200 mm deep, with or without recessed grip.



Please note our safety instructions!

The slope step and the bar (one bar per step is included in the step price) are delivered "raw" but may already show signs of rust or flash rust - depending on the weather conditions. In the course of time, the slope steps and bars will become completely rusty. The bars have a tolerance of +/- 1 cm in length.



  • Article condition: new

  • Material step: steel raw
  • Material thickness step: 2 mm
  • Tread surface: with anti-slip foil, good stability
  • Tread form: The tread is trapezoidal. The side facing the slope (short legs) is narrower than the side with the long legs. You can find details on the technical data here!

  • Pasted surface:
  • Step size 200 x 200 mm: 180 x 180 mm
  • Step size 200 x 290 mm: 180 x 270 mm
  • Step size 200 x 380 mm: 180 x 360 mm

  • Material bar: steel raw
  • Material thickness bar: 8 mm



With the slope steps (also called embankment steps) you can quickly and easily build a garden staircase on a slope. Building steps outside is therefore very easy and your slope garden ideas can be realised.

SR020

Data sheet

Type
"Mini"
Depth
200 mm
Material
Steel raw
Surface
Anti-slip foil
Surefootedness
3* (of max. 4*)
For slope gradient
Suitable up to 35 degrees
Suitable up to 40 degrees
Suitable up to 45 degrees
Minimum order quantity
Yes, please note
Volume discount
No
Product type
Slope steps

Specific References

EAN13
4260679920207

Manufacturer information:

Ulrich M. Wilhelm
Hangstufen.de
Ottmarshauser Straße 53

86356 Neusäß

Germany

Email: info@hangstufen.de

Instructions and warnings

1. Assembly

Slope step assembly instructions

Bar positions for slope steps

Assembly instructions (PDF)

Safety instructions (PDF)

Assembly Bar positions Set the crossbar Disassembly with grip hole Disassembly without grip hole

2. Safety

Wear work gloves and sturdy, secure footwear when transporting, assembling and dismantling the steps.

Make sure the slope steps are firmly anchored. Always use the steel bar, ensure that it extends evenly on both sides, and carry out a load test.

Install the tread with a slight incline towards the slope. Take care not to lose your balance and tip forward.

Only use the steps while wearing sturdy footwear.

Do not use the steps during or after rain, or in wet, icy or snowy conditions. After such conditions, check that the steps do not give way in the ground and that they are stable before stepping on them.

Safety instructions for slope steps

Safety instructions for walkway slabs

Safety instructions for slope steps

3. Use

The steps improve access to slopes and embankments and must only be used for their intended purpose.

4. Care

Keep the steps free of dirt, soil, leaves and twigs to ensure a secure foothold.

5. Liability

Follow the manufacturer's information, instructions and safety notices. Defective products must be taken out of use immediately.

AR is not supported on this device

You might also like

3 same category products :